So easy to forget those little life lessons until your finger tips are being
broiled. Much like the quick hole solved by the drill press, "sure, I can hold
it with one hand..." then the bit catches.....
Keith Turk <kturk@ala.net> wrote: It's not fair to say this isn't really an LSR
problem... cause stuff like this
happens to all of us, It's just that most of you are smart enough not to
report it on a regular basis...
So... there I was... making some cute brackets for a wiring loom... basically
they are 1/2" wide 1.5" long bits of aluminum with three holes drilled in
them... one 1/4" hole and two 1/8th" holes. You mount it with the big hole
and use the little holes to wire tie the wires in place.
That's the project... not to complicated eh?...
I didn't like the way the Shear cut the metal so I took it over and used the
band saw to do all the cutting ... just a bit of planning and the whole thing
was going simply rosey... Kept all my finger tips and everything... ahhh
but now we get to the heart of the matter and the reason for this over winded
e-mail in the first place... Those dang band saws leave a rough edge and a
fella oughta take these tiny things over to the horizontal belt sander and
have a go at cleaning up those edges don't ya think? (This is for my 32
roaster project... so tidy work is always required...)
Did ya know that Aluminum is a great transferor of Heat energy? No Really it
is... I promise... if you try and hold one of these little brackets while
it's rubbing itself off with the belt the dang thing creates friction.. and
friction creates ... yep... Heat... ( pretty fancy stuff eh? )
Betcha can guess how long a man can stand the heat of the fire here can't
ya... Yep... NOT long... and just like them burners on the stove... YOU will
rapidly remove your fingers from the source of the Heat... and once you do...
this little bracket, Well it takes off for parts unknown. Where... Hmmm
don't know... here's what I know... The speed of the belt in conjunction
with the light weight of the material involved ... virtually guarantee's
you'll never find it... Keeping your eye on the ball here isn't possible when
your primary objective is to stuff your hand in your mouth.
Always keep in mind that it takes less time to make a new bracket if you have
to move the sander, drill press, bench, and tool boxes to find the old one...
and oh by the way... I already told you that you weren't going to find it...
( no matter how much you love the challenge )
So there you go... Life continues to be Good...
Keith ( 20 days without Nicotine )
_______________________________________________
dmirror3@yahoo.com
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
The problem is not that the world is full of fools...it's that lightning is
not distributed properly
Samuel Clemens
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
|