Mayf:
I have foam and cloth and resin....call me.
Skip
At 07:14 AM 10/16/2008, Doug Odom wrote:
>Mayf, There are a couple ways to make one off parts like what you
>want. One way is to form the shape you want out of chicken wire.
>When you get it where you like you can lay some finer wire mesh like
>window screen over the chicken wire. then bondo that to get a nice
>finish. Remember to make the bondo pattern slightly smaller than you
>want the finished part to be because you are making the inside of
>the part. Use molding release wax on the bondo and then lay up the
>fiberglass over the bondo. When it cures it is easy to cut/break the
>wire/bondo out of the backside.
>----- Original Message ----- From: "drmayf" <drmayf@mayfco.com>
>To: "LSR" <land-speed@autox.team.net>
>Sent: Wednesday, October 15, 2008 10:09 PM
>Subject: [Land-speed] A foam question
>
>
>>Well, more in line wih fiber glassing than foam. What kind of foam
>>do I need to get to make a buck to build a one off fiberglass
>>piece. I want to put a slightly modified nose ont eh Sunbeam,
>>noting fancy but more aero than the blanked off grill opening.
>>
>>Anybody made fiber glass parts using a foam shape? I watched them o
>>it on Muscle Cars and it idn't look all that bad. I'll be listening
>>for anyone who has done this to chime in....
>>
>>mayf
>_______________________________________________
>Support Team.Net http://www.team.net/donate.html
>
>Land-speed mailing list
>
>You are subscribed as saltrat@pahrump.com
>
>http://autox.team.net/mailman/listinfo/land-speed
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
|