You have to remember that in the '50's when these auto companies were
producing a million vehicles a year a penny saved on the cost of each would
have paid the salary, fringes and overhead costs of an experienced engineer
for a year. .............Ed Weldon
----- Original Message -----
From: "Mark J Bradakis" <mark@bradakis.com>
To: <land-speed@autox.team.net>
Sent: Thursday, November 24, 2011 8:09 PM
Subject: Re: [Land-speed] Dumb Question # 4857 - Wrist Pin Diameters
> > What the heck is up with the odd ball diameters of the pins?
> > When I looked through a listing of pins, I don't think I found any
> > with what I would consider a nominal dimension. I mean, fords
> > is 0.912 inches and GM's is 0.927. Why the odd dimension used?
>
> Likely they start with 1 inch stock, and when the piece is finished
> that is where it ends up.
>
> mjb.
> _______________________________________________
> Land-speed@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/land-speed/23.weldon@comcast.net
_______________________________________________
Land-speed@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|