mg-t
[Top] [All Lists]

Re: [Mg-t] Posting

To: <Mg-t@autox.team.net>
Subject: Re: [Mg-t] Posting
From: "John F. Quilter" <jquilter@peoplepc.com>
Date: Mon, 7 Nov 2011 12:10:52 -0800
The screws holding the brake drums on sound like what was used on a Morris 
Minor or Bug Eye Sprite and on the earlier MGA.   The Morris and Sprite had 
7 inch drums front and rear so are much smaller than the ones on a TD, but 
the MGA ones were larger.  Could the car you are working on have been 
converted to MGA brakes?  On all these the drums were separate from the 
hubs.  Moss' on line catalogue shows these screws but their illustration 
shows plain screws not Phillips like the originals and they come in two 
lengths, 1/2 and 5/8ths inches.

John Quilter
Eugene, Oregon

----- Original Message ----- 
From: "Chip Old" <feold3@mac.com>
To: "MGT" <mg-t@autox.team.net>
Sent: Monday, November 07, 2011 5:50 AM
Subject: Re: [Mg-t] Posting


> On Mon 07 Nov 2011 at 07:55 AM EST, gunnellj tds.net <gunnellj@tds.net> 
> wrote to Chip Old :
>
>> Chip
>>
>>     OK. Her's what I wanted to ask.
>>
>>    I have a 1950 TD that I am redoing as a hot rod. I bought it for $500. 
>> On this car the brake drums were held on with short, fat screws that had 
>> a taper at the slotted end. The car was so rusty that these screws got 
>> more or less ruined. In fact, on one side I drilled them out and the 
>> threads would need repair.
>>
>>    My 1952 TD has a different style of brake drums without the screws. 
>> Are the two types of drums interchangeable? Or more correctly, can the 
>> later style be used on the earlier car?
>>
>>    Also having trouble getting one of the "castle nuts" off the hub. Are 
>> they both normal threads or does one side have a reverse thread?
>>
>> John Gunnell
>> Iola, WI
>
>
> John,
>
> You really should have posted that to the group, not directly to me. There 
> are lots of group members who know the finer points of the TD a lot better 
> than I do. I'm replying to the group so others can pitch in.
>
> If I remember correctly (which could be a problem):
>
> Early TD brake drums are separate from the hubs. The countersunk machine 
> screws are to make sure the drum is centered on the hub, and to hold the 
> drum and hub together when the lug nuts are removed. The ends of the 
> countersunk screws are peened over after assembly, to prevent disassembly. 
> According to the TD/TF Workshop Manual the drum and hub are not meant to 
> be disassembled.
>
> Later TDs have one-piece hubs and drums.
>
> As far as I know the two types are interchangeable, but you should ask the 
> TD experts in the group to make sure.
>
> If you're talking about the front hubs, the right-hand side has a 
> right-handed thread, the left-hand side has a left-handed thread.
>
> -- 
> Chip Old <feold3@mac.com>
> Cub Hill, Maryland, US
> 1948 M.G. TC TC6710  XPAG7430
> ______________________________________________
>
> Mg-t@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/mg-t/jquilter@peoplepc.com
______________________________________________

Mg-t@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>