mgb-v8
[Top] [All Lists]

Re: ROVER/B-O-P 3500/215 DISTRIBUTOR

To: John Bartholomew <jdb70@minerva.amdahl.com>
Subject: Re: ROVER/B-O-P 3500/215 DISTRIBUTOR
From: Jim Stuart <jimbb88@erols.com>
Date: Mon, 07 Jun 1999 18:32:59 -0400
Cc: buick-rover-v8@autox.team.net, mgb-v8@autox.team.net
References: <4.1.19990607074509.00991580@minerva.amdahl.com>
Reply-to: Jim Stuart <jimbb88@erols.com>
Sender: owner-mgb-v8@autox.team.net
John-

You should be able to buy a rebuilt 215 dizzy from any of the larger auto parts
companies, special order, 2-5 days. Try NAPA, Auto Zone, Pep Boys, etc.

D & D lists a rebuilt dizzy, including points, condenser, cap & rotor, with vac
advance for $75.00. I am sure Dan has several on hand.  810 798 2491.

The HEI will not clear your intake without cutting away part of the front 
runner,
& using a button head bolt in place of the hex head mounting bolt at that point.
I have done it, but found that the HEI was too tall to clear the MG hood. The
dizzy came from a '70's Buick 350 V8.

Mallory & others make aftermarket dizzys, magnetic, optic, dual point, etc. Try
Summit for these.

Jim Stuart

John Bartholomew wrote:

> Hi listers,
>            I need some assistance in locating a suitable distributor for my
> V8 engine project.
> Last Saturday while looking for a couple of parts for my daughter's Honda,
> I thought I would take the opportunity to look for a distributor for my V8
> project.  Well it soon became evident that not ANY GM V8 distributor will do!
> I remember reading that most any HEI ignition set up will work but I see
> now, after pulling a couple of units, that I need a specific style of shaft
> and gear drive. I got a little frustrated having selected a unit that I
> thought was in pretty good shape, from an Olsmobile something, when I
> realised I should be looking for a unit that is a front mounted
> distributor, because of the shaft length.  I pulled a couple only to
> realise they were 6's not 8's.
> Being completely in the dark, never having pulled a V8 apart and my project
> engine came without a distributor. I finally decided to leave the yard
> without a unit and get some help from the list. From my observations, I
> found that all of the cars I saw with front mounted distributors, were
> those short 6 cylinder engines and so the distributors are not suitable, or
> are they if modified ?. Do I need a V6 distributor with a different cap ?.
> So folks, what do I look for, should I get two units, a V8 and a V6 and
> combine parts from both to make one that works, or is there something
> specific I should be looking for? The price seemed right @ $25, or two for
> $50!.
> I know there are no 215 motors with distributors at the yard I was at.
> Your guidence is greatly appreciated.  John.
> ---------------------------------
>      E-mail jdb70@minerva.amdahl.com
>   John Bartholomew Amdahl San Jose CA.
>   ** 408-746-6361 07:00-16:00 PST.  **
>     **  USUAL DISCLAIMERS APPLY  **
> Various MGB & GT's (6) '69 to 79; 86 XJ-S COUPE


<Prev in Thread] Current Thread [Next in Thread>