mgb-v8
[Top] [All Lists]

Re: MGB door locks

To: "Barrie Robinson" <barrier@bconnex.net>, <mgb-v8@autox.team.net>, <mgs@autox.team.net>
Subject: Re: MGB door locks
From: "Telewest \(PH\)" <paul.hunt1@blueyonder.co.uk>
Date: Thu, 9 Oct 2003 09:42:06 +0100
References: <5.2.1.1.0.20031008163848.00a94470@mail.look.ca>
Reply-to: "Telewest \(PH\)" <paul.hunt1@blueyonder.co.uk>
Sender: owner-mgb-v8@autox.team.net
The big (door opening) lever should return to flush when let go, only the
smaller locking lever stays either side with the door fully shut.  The parts
list doesn't show a separate spring on the opening rod, although there could
be one (2" long?) as part of the internal control assembly immediately
before the plastic block where the rod to the actual lock goes.  But I'm not
sure whether you are having problems with the internal door opener not
returning or not working at all, or the internal lock not working.

PaulH.

----- Original Message -----
From: "Barrie Robinson" <barrier@bconnex.net>
To: <mgb-v8@autox.team.net>; <mgs@autox.team.net>
Sent: Thursday, October 09, 2003 12:44 AM
Subject: MGB door locks


> Has anyone out there got real good experience with late model MGB door
> locks.

///
///  mgb-v8@autox.team.net mailing list
///  Send admin requests to majordomo@autox.team.net
///  Send list postings to mgb-v8@autox.team.net
///  Edit your replies!  If they include this trailer, they will NOT be sent.
///


<Prev in Thread] Current Thread [Next in Thread>