mgs
[Top] [All Lists]

Re: Oil Draining

To: alban@psdb-tb.demon.co.uk
Subject: Re: Oil Draining
From: jarnott@ednet1.osl.or.gov (Jim Arnott)
Date: Thu, 27 Jul 1995 11:21:03 -0700

>
>I appear to have a bit of a problem with a A series engine with the oil
>getting pumped up into the rocker cover and then not draining back into the
>sump. The top face of the cylinder head is wet with oil even though the
>rocker cover (a fairly stiff alloy one) is tightly screwed down. There are
>spots of oil around the inlet manifold, carb and heater piping as though
>it's squirting out under pressure. OK it's a race engine and so is
>subjected to high revs and higher than usual levels of cornering and
>braking forces but that shouldn't make a difference to the draining of oil.
>
>I am aware that this is not an uncommon problem in V8 engines but has
>anyone else had it occur in an A or B series?

Had a similiar problem with a "B" engine years ago.  Seems that
a plugged PCV valve was causing positive pressure in the crankcase.
Blew oil out of every seam and the dipstick hole.  If you have a
PCV system on your race engine, you might want to check it out.

jim

--
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ Parts left out cost nothing and have an infinite service life.        +
+                                                       Chas. Kettering +
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

<Prev in Thread] Current Thread [Next in Thread>
  • Oil Draining, Alan Brooke
    • Re: Oil Draining, Jim Arnott <=