At 02:32 PM 1/6/96 +0500, Jay Tilton wrote:
>That's the one. Underneath the cover you'll find three pieces to the damper
>assembly, one of which is a short spring. The spring isn't loaded enough to
>make things fly apart, so don't fear disassembly. Also, there will be one
>or more very thin shims between the cover and the rack--don't lose any of them.
>--
>Jay Tilton / jtilton@vt.edu (vt = Virginia Tech)
>Home page: http://fbox.vt.edu:10021/J/jtilton/index.html
> MGB page: http://fbox.vt.edu:10021/J/jtilton/mg/jaysmg.html
>
I remove these pieces, add the gear oil, and then reassemble. I do this once
or twice a year. It is messy as I invariably drip oil on the rack in the
process. But outside of the mess, it is a simple job not to be feared.
--------------------------------------------------------------------
David Councill
dcouncil@imt.net
http://www.imt.net/~dcouncil/home.html
--------------------------------------------------------------------
|