mgs
[Top] [All Lists]

Re: air injection

To: James N Ross <jim@crocker.com>
Subject: Re: air injection
From: Wayne Kube <wkube@iadfw.net>
Date: Sat, 19 Apr 1997 20:31:34 -0500
James N Ross wrote:
> 
> Have almost completed reassembly of my 1800 rebuilt engine. Have removed air
> injection manifold and want to plug ports in the cylinder head. They are
> 7/16 in fine. Same as fly wheel bolts. The two end ports need a plug due to
> clearance problems with the casting. All the plugs I have found are pipe
> thread, not fine. Need help.
> 
> Thanks
> Jim,   1973 mgb  (Dad's Beauty)

Jim -
        Get 7/16 fine thread set screws - have hex socket (Allen) heads.  Screw
in nicely, with no protrusions above the head.

-- 
Keep on keepin' on!

Wayne Kube              wkube@iadfw.net
1979 MGB                http://web2.airmail.net/wkube
Plano, TX       
Texas MG Register       http://www.tmgr.org
NAMGBR UK Site          http://www.mgcars.org.uk/namgbr
NAMGBR US Site          http://www.british-cars.org.uk/kimber/namgbr

<Prev in Thread] Current Thread [Next in Thread>