>Well, my question is: Does anyone have a tip on how to prevent the blade from
>coming off the arm? As far as I can tell it is only held on by friction
>provided by a little spring clip. I was thinking of trying a drop of locktite.
>I hesitate to glue them on as they have to be replaced periodically.
>Bob Donahue (Still stuck in the '50s)
>EMAIL - BOBMGT@AOL.COM
>52 MGTD - under DIY restoration NEMGTR #11470
>71 MGB - AMGBA #96-12029, NAMGBR #7-3336
Well, Bob, your wiper arms must be different than my '79. Mine have a
little button that protrudes fron the front side of the arm which engages
in a hole in the wiper blade. The underside of the blade has a spring
which holds the end of the arm firmly against this hole. So, either your
arms have no button, or the blades are missing either the hole or the
Depending on the type of blade, you may be able to use a set screw, either
threaded into the blade assembly, or into the tip of the arm (probably a
more durable option) Just my 1 1/2 cents worth.