mgs
[Top] [All Lists]

Re: engine rebuild stuff

To: Trevor Boicey <tboicey@brit.ca>
Subject: Re: engine rebuild stuff
From: neil.cairns@virgin.net
Date: Mon, 07 Sep 1998 21:29:24 -0700
Trevor Boicey wrote:
> 
> neil.cairns@virgin.net wrote:
> > A) Airlines can have up to 50psi in them
> 
>   I would suspect almost all have 90psi. Most air tools run
> at 90psi, and you seldom lower the setting as only spray guns
> require a setting other than 90psi. So when you clip on the
> blow gun, it's 90psi.

The standard air pressure in UK air driven tools is 50 psi. I worked on
aircraft for 22 years using it, oddly enough, so I do know what I am
talking about. The air-driven tools were of American manufacture by the
way.
> 
> > 'Air lines can KILL', as the posters say...and people do not seem to
> > realise.
> 
>   Well, obviously any tool can be used stupidly, but your
> post seems almost to say "crazy people could use an air
> line", which I disagree with. Air lines are extremely useful,
> along with welders and grinders and all kinds of tools that
> can also be dangerous.

The list is read by many people, are you saying we should not put
warnings in? Ofcourse air lines are useful, I do not quite get the point
you are trying to make. I was advising someone whose engineering
knowledge was not as great as most. Airlines can kill, do you find that
strange? I quoted to you a recent fatal accident, ( if it can be called
an accident.) Air can be forced under the skin at as lower pressures as
10psi. Air in an artery entering the heart or brain is often fatal.
> 
> > A) Dissagree....it is an excellent way to check any rod or tube for
> > initial straightness, a bent rod or tube will stand out instantly.

To check a metal bar or a tube, it is engineering practice to roll it on
a surface plate, or a plate-glass sheet. This is a quick way of seeing
if it has a bow or bend in it. If you like, you can also put the
push-rod into a lathe, in a chuck and a centre, and use a DTI to measure
its run out. A bent push rod can be sprung out of its position at high
rpm, which could wreck an engine. Are you saying I should not have
mentioned this check? If you have a better idea to check them, let us
all see it please.  
> 
>   Then I guess we're going to go play some snooker son. How does
> $5/point sound!

 I was under the impression the list existed to HELP people, and I try
to do just that. If you have a better method of doing things, then say
so. We would all like to hear them. 

Neil.
> 
> --
> Trevor Boicey, Ottawa, Canada.
> tboicey@brit.ca, ICQ #17432933
> http://www.brit.ca/~tboicey/

<Prev in Thread] Current Thread [Next in Thread>