mgs
[Top] [All Lists]

Re: Orange Peel?

To: "Wakefield, Glenn" <Glenn.Wakefield@Jacobs.com>
Subject: Re: Orange Peel?
From: Trevor Boicey <tboicey@brit.ca>
Date: Mon, 25 Jan 1999 21:50:13 -0500
"Wakefield, Glenn" wrote:
> 
> I'm still trying to prep the body for paint.  After a very lengthy
> discussion with the local paint shop, they talked me into a base / clear of
> acrylic enamel.  However that isn't my problem.  I shot the primer over the
> weekend.  I wore the correct respirator etc for the job.  When I finished it
> felt like 100 grit sandpaper.

  That's normal, as mentioned perhaps a bit dry but primer generally
does not go on glassy smooth, it's textured and sometimes gritty
depending on the "touch" of the gun. It's thick and sprayed with
low pressure so it doesn't fan out on the surface like paint.

  The spec sheets say to do exactly as you did, wet sand after
application
and then apply over.

> I guess this is the famous orange peel. 

  Orange peel is still smooth to the fingers, but not to the
eye. It looks... well... close to orange peel. ;>

> On another note.  Can I sand the base after I shoot it?  What grit sandpaper
> do I use?

  Fine. ;>

> How about the clear coat?

  Probably not. In theory you can sand and then polish back to
a mirror again, but this is generally only done in spots
like if you make a run. Doing for the whole car is not really
feasible.
 
-- 
Trevor Boicey, P. Eng.
Ottawa, Canada, tboicey@brit.ca
ICQ #17432933 http://www.brit.ca/~tboicey/

<Prev in Thread] Current Thread [Next in Thread>