In a message dated 7/3/99 11:52:41 PM Central Daylight Time,
lottala@mail.auburn.edu writes:
<< Scott,
1) lay on driver's floorboard on your back
2) use flashlight to find the back-side of the speedo
3) wedge hand up behind instruments and loosen/remove two thumbscrews
holding gauge in
4) either unscrew the cable now or try to carefully tip the gauge out and
remove the cable once the speedo is partially out of the panel
5) remove instrument light/wire from speedo
6) marvel at your good work
piece of cake ... so dive right in :) ... good luck
~alan
'71B >>
You forgot step 7...
Clean all cuts and scratches, apply Neosporin and band-aids.
R. Johnson - Dallas
|