Hi folks, tested my starter and it would not turn. I took it apart and
noted one of the coils was not correctly in place and had a turn sticking
out. I painted it with a thick anti corrosive paint similar to the OEM
stuff and put it back in place. I tested continuity along the coils and all
is OK. I reassembled the starter and will test it later. My questions are:
1. How hard is it to turn the bendix by hand. Mine is pretty stiff but I
can still turn it with my thumb?
2. How can I test for insulation with my tester?
thanks for the help, Enrique
|