It appears that you have an excessive amount of antirotational force
generated by the low amount of residual power that is stored in your
Dilithium Crystals.
Does your drive cable go to a 90 degree adapter?? I had a problem with the
adapter not turning. Fixed by using some structural epoxy on the short length
of cable (1 inch or so) going into the GB. The crimp of this length of cable
had loosen and would spin but not turn the output where your cable attaches.
If you place the rear up in the air, you should be able to put it into drive
and check for the rotation. You can op without the 90 degree adapter also.
Good Luck
Ray Easterby
72 BGT orig own
88 Xj 40
|