Frank, technically you are correct. I have done the same
thing on occasion. I have also had the rubber on the mounts
de-laminate from the steel pad ... not a good thing. I
suspect it was from the procedure you have outlined.
Larry Hoy
> -----Original Message-----
> From: owner-mgs@autox.team.net
> [mailto:owner-mgs@autox.team.net]On
> Behalf Of frank krajewski
> Mike:
> You don't really need to undo the motor mounts. Just jack
until they are
> stretched to the max, you will know this because the car
will start to
> lift. That provides ample room to reach the bolts in the
front. Been there
> numerous times.
> Frank "Swamp Yankee" Krajewski
|