Word on the street is that Dodd, Kelvin said:
> If I need more height, or clearance for engine/exhaust work then I
> put the stands under the frame rails. This point is the furthest forward
> before the rails arch upwards. Do not use this point if you intend to
> remove the rear axle assembly. The combined weight or engine and front
> crossmember is enough to move the balance point close to this position when
> the rear axle is removed.
I always use the frame rails when I'm working on the front of the car.
Skye
--
1966 MGB - GHN3L Safety Fast! __,__\__
The MGB Experience http://www.mgb.bc.ca/ (_o____o_)
|