when you pull back to flash the lows will still be powered. I can't help
with anything else unfortunately, although it sounds like your switch has
some issues.
James Nazarian
'71 B roadster
'71 BGT rust free and burnt orange
'63 Buick 215
On Tue, 16 May 2000, Geoffrey Gallaway wrote:
> Ok, so does someone on the list have experience with the headlights on a
> BGT? I have the situation where while lowbeams are selected on the stalk I
> get both headlights on lowbeams, pulling the stalk back (to flash the
> highbeams) I get the right headlight to a highbeam and the left one stays
> lowbeam. Pushing the stalk forward for always-on highbeams I get nothing.
> What the heck is going on?
>
> AFAIK, headlights have three connections, ground and two hots, one for
> lowbeam and the other for highbeam. So, when I pull back on the stalk for
> flashing the highbeams or push the stalk forward for setting the highbeams
> on, I should be powering the ground and the highbeam hot. When I set the
> stalk to center for lowbeams on, I should be powering the ground and the
> lowbeam hot. Is this not how it works?
>
> Geoff
>
> --
> Geoffrey Gallaway || I must be a real system administrator, the real world
> geoffeg@sloth.org || doesn't make sense to me anymore.
> D e v o r z h u n || -- Doug
>
|