Re: More info about underneath clutch replacement

[Charley & Peggy Robinson <ccrobins@ktc.com>]

  I flat don't believe it will work.  Fisher Jones, who has worked on
every LBC known to man, says he tried it once, just to see.  The tranny
wouldn't come out.  By the time you move it far enough back to clear the
clutch it won't tilt down because the larger diameter of the tailshaft
housing is engaged within the fixed crossmember.

  Anyway, think about it.  You'd still havre to remove the driveshaft,
rear mounts and crossmember. Also the slave cylinder.  A bit more work
and the whole thing is out on the bench.  A pox on the whole idea!

  CR