This is a good possibility. Had the same problem with my TD, as it
got hot the little prongs that hold the fuse in would get hot and pull
apart, ever slightly and break the contact. It was bear to find.
THANKS!
MIKE R
----- Original Message -----
From: "Walt Goddard" <waltcpa@sierra.net>
To: <Duinhoven_Hans@emc.com>; <mrazor@mis.net>; <mgs@autox.team.net>
Sent: Thursday, August 24, 2000 5:51 PM
Subject: Re: MGB Runs/Does Not Run
> As others have said, I would check the electrical connections at the
> coil, fuse box, relays, and other items that are in those areas.
Just
> went through that. Cleaning bad connections and new wires to
replace
> the ones with melted insulation fixed it.
>
> Walt Goddard
> waltcpa@sierra.net
>
> 77B
|