Hi Barney,
Actually, it was quite easy after I discovered the screw that retained the
distributor mounting housing among the layer of crud. With the housing removed,
the drive just slipped right out. I'm learning new things every day. About to
head to the machine shop with the block.
Bud
Barney Gaylord wrote:
> At 08:25 PM 11/23/2000 -0500, frank krajewski wrote:
> >.... the dizzzy gear rotates out. It contacts the cam and you can't remove
> the cam without first removing the dist. gear drive. ....
>
> Actually you can. Just rotate the cam so the #4 intake cam lobe clears the
> dizzy drive gear and you can remove the cam.
>
> Barney Gaylord
> 1958 MGA with an attitude
> http://www.ntsource.com/~barneymg
|