Mark,
You can check it out with the instructor, himself. He's our own (!) Lawrie
Alexander.
Mark and kathy LaPierre wrote:
> Hi Dave,
> I've missed this book some how. Can you give title and maybe ISBN#. I
> would like to pick it up. Thanks.
> Also for those who have referred to the Moss motors video tape on
> carburetors. There is a few mistakes one of which is on the HIF carbs. The
> instructor on the tape says to turn the adjustment screw in the side of the
> carb CW to lean the mixture and CCW to richen it.
> This is incorrect. It should be just the opposite. I have looked at this
> several times on my carbs when apart to confirm this. At least on my old,
> old tape the instructions are incorrect.
> Mark
> ----- Original Message -----
> From: Dave Wood <djw69@idt.net>
> To: mgs <mgs@autox.team.net>
> Sent: Friday, December 01, 2000 1:19 AM
> Subject: Re: 72 MGB-carbs, HIF type
>
> > Dan,
> >
> > You said that you had soldered the butterfly valves and that rang a bell
> in
> > the back of my mind. Just went back to Peter Burgess' book and reread
> what
> > he said about the HIF and the butterfly valve. Apparently the spring
> loaded
> 72 B
--
Bud Krueger
http://home.ici.net/~bkrueger/
52TD
77MGB
|