Hi Allen,
Thanks for the advice. Since it effected the wipers I went for the #3 fuse
down, did some jiggling and now everything's back to normal. Well, normal
if I didn't think it was a good idea to replace the fuse block and all the
connections to it.
Thanks again,
Scott
>From: Ajhsys@aol.com
>To: scottinarl@hotmail.com, mgs@autox.team.net
>Subject: Re: Dead Dash
>Date: Mon, 22 Jan 2001 13:04:00 EST
>
>In a message dated 1/22/01 10:37:18 AM Eastern Standard Time,
>scottinarl@hotmail.com writes:
>
>
> > Fire her up to get to work this AM, (temp has risen to the 20's) and the
> > heater switch, water temp gauge and tach aren't working. Checked all
>the
> > fuses and they're all intact, and everything else works.
> >
> > Find it hard to believe they'd all stop working at the same time.
> >
> >
>
>- - - - - - - - - - - - -
>
>I had the exact same thing happen last year in my '77 Midget. (Except my
>temp gauge doesn't work, but the wipers also stopped.) I checked all the
>fuses and they were all good. Then I touched one fuse, and everything came
>back on. The fuse was good but the ends were corroded. Check to see if
>everything that quit is on the same circuit, and if so, I would suspect the
>fuse block or a connector on the fuse block.
>
>Allen Hefner
>SCCA Philly Region Rally Steward
>'77 Midget
>'92 Mitsubishi Expo LRV Sport
>
_________________________________________________________________
|