[Top] [All Lists]

Re: Surface Rust

To: "''" <>
Subject: Re: Surface Rust
From: "Cady, Richard H" <>
Date: Mon, 2 Apr 2001 10:48:42 -0400
Two part epoxy primers do prevent moisture from passing through the bare
primer to the steel below.  Ditzler etching epoxy primer for instance.  You
must have a spray gun to apply it.   When you're ready to apply a primer
filler over the epoxy, the epoxy must be scuffed up, and a fresh coat of
epoxy must be reapplied, followed by the primer filler.  

This is in not an inexpensive solution to the problem though.  The stuff is
very expensive.

70 B roadster

/// mailing list
///  (If they are dupes, this trailer may also catch them.)

<Prev in Thread] Current Thread [Next in Thread>