mgs
[Top] [All Lists]

Re: floor pan repair

To: mgs <mgs@autox.team.net>
Subject: Re: floor pan repair
From: Bullwinkle <yd3@nvc.net>
Date: Thu, 03 May 2001 16:15:09 -0600
Robert E.

When I rebuilt the sills on my MG, I used sheet metal screws. 
You have to drill holes for the Cleco's and the pliers and
fasteners aren't cheap.  I drilled holes in the outer panel
larger than the sheet metal screw (just like you have to for
Clecos), and then used self drilling/tapping sheet metal screws
to hold everything together.  One screw at a time was removed and
the parts plug welded together.

Blake

///
///  mgs@autox.team.net mailing list
///  (If they are dupes, this trailer may also catch them.)


<Prev in Thread] Current Thread [Next in Thread>