Thanks for the suggestion. I'll check it out.
Lew Palmer wrote:
> I have two suggestions:
> 1) Rather than Helicoils, I've used a product called "Keyserts". They
> are a threaded metal insert, not a coiled wire. You use a standard (12
> mm, I think) tap and a small inexpensive tool that comes with the
> Keyserts to set them. They are hardened and a much stronger than
> Helicoils. They also don't have the nasty habit of uncoiling when you
> insert the bolt too far or remove it. They are available from a number
> of industrial supply companies. I got mine from Lawson Products. The
> Lawson product number for the 8mm x 1.0 is 19821 and the setting tool is
> 89864. You should be able to find a Lawson distributor locally.
> Otherwise, http://www.lawsonproducts.com.
> 2) Helicoils are available from any number of industrial distributors,
> including Lawson Products. A quick check with your local auto parts
> house should turn up a ket or two.
> But again, I MUCH PREFER the Keyserts. They're easy to install,
> extremely strong, and work as well in aluminum as cast iron. I couldn't
> get a Helicoil to hold well in my aluminum timing chain cover. The
> Helicoil kept pulling out. But the Keyserts worked beautifully, allowed
> me to put much more torque on the bolt. And, the best news is they are
> MUCH cheaper than Helicoils.
> Lew Palmer
> -----Original Message-----
> From: firstname.lastname@example.org [mailto:email@example.com] On
> Behalf Of Bud Krueger
> Sent: Saturday, February 09, 2002 11:49 AM
> To: mg-t; MG List
> Subject: 8x1mm Helicoil Kit
> Hi folks,
> Getting ready to start work on Lazarus' (52TD) engine. Last time I
> put it
> together I wasn't all that happy with some of the threads. This time
> be some Helicoils in before it's bolted up to the engine stand. At the
> the only source that I know of for an 8x1mm Helicoil kit is from
> Abingdon Spares
> at $85.70 (extra coils at $1.35/ea.). Does anybody know of another
> source at a
> lower price? TIA.
> Bud Krueger
/// firstname.lastname@example.org mailing list
/// or try http://www.team.net/cgi-bin/majorcool