IWhen I did mine, during bleeding, I also hand pushed the slave rod all the
way back in between pedal strokes to help expell any air.
Mike
'79B
----- Original Message -----
From: "Larry Hoy" <larryhoy@prodigy.net>
To: <mgs@autox.team.net>
Sent: Saturday, June 15, 2002 6:33 PM
Subject: RE: Well the clutch hose is fitted....no clutch pressure??
> Yep, I have a suggestion. Have someone push the peddle down while you
> look at the rod that comes out of the slave. The rod should move 1/2".
> If it doesn't you haven't bled the air out of the system.
>
> Make sure the hose is in the lower hole on the slave and the bleeder is
> on the higher hole.
>
> You'll undoubtedly get many responses from this list on how to do the
> bleeding.
>
> Larry Hoy
>
> > Now, I go to bleed the system...takes about 10 min to
> > finally get some pressure where fluid bleeds out. No air
> > bubbles. But the clutch won't enguage. Any ideas? How
> > should I be bleeding the system properly.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|