mgs
[Top] [All Lists]

Re: Refitting a MGB heater - how?

To: MG List <mgs@autox.team.net>
Subject: Re: Refitting a MGB heater - how?
From: Max Heim <mvheim@attbi.com>
Date: Mon, 12 Aug 2002 10:10:54 -0700
Arrgh! The heater is ... the worst. It's a little-known fact that the
Marquis de Sade took a shift on the drawing board at Abingdon.

It kind of depends where you detached the control cables. It may help if you
follow the instructions in the manual (if there are instructions in the
manual -- I don't recall seeing any, but that may explain why I had such a
hard time with it). But even if you have the proper procedures, access is so
tight that it's not going to be pleasant...

Good luck.


on 8/11/02 11:04 PM, Steve Shoyer at Steve@shoyer.com wrote:

> I'm getting close to having all of the parts back in my fire-damaged 1980 MGB.
> Does anyone have tips for getting the heater into position?  Removing it was
> tough enough, but I'd appreciate some advice that will help me save time and
> my sanity.
> 
> Thanks.
> 
> --Steve Shoyer (1980/79/78 MGB)
> 


--

Max Heim
'66 MGB GHN3L76149
If you're near Mountain View, CA,
it's the primer red one with chrome wires

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>