If the clutch plate is centered all you need to do is rotate the shaft
back and fourth a little. It should just slide right in.
That's easy to do if both the engine and the tranny are out of the car,
a bit more difficult if in the car.
> -----Original Message-----
> From: email@example.com
> [mailto:firstname.lastname@example.org] On Behalf Of Scott Allen
> Sent: Tuesday, October 29, 2002 1:15 PM
> To: email@example.com
> Subject: Clutch Alignment Tricks?
> I'm putting a new clutch in my '74 1/2, and I'm having a devil of a
> getting it to like up on the spline.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive