[Top] [All Lists]

Re: Heater Air Valve Inner Cable Replacement

Subject: Re: Heater Air Valve Inner Cable Replacement
From: Bob Howard <>
Date: Tue, 12 Nov 2002 18:05:49 -0500
   I suggested that one can reach the flap/cable clamp through the hot
air vents in the footwell. It's a tight fit and you might find that
removing the rivets on the little air deflector is necessary for wrench
access.  Try wrenches to determine the necessary size before you slip the
heater box into place. 

On Tue, 12 Nov 2002 13:34:25 -0500 "Christian, Skip"
<> writes:
> Group.  OK, I was all ready to tackle this job until I saw that it 
> "might" be the hardest (or in the top 5) job to do on an MGB !!  Can
> give me some pointers to help do this job.  The outer cable is fine,
but the 
> PO installed flexible stranded cable for the inner cable when he put 
> the car back together.  I have a new cable, heater box gasket, and
> for the fresh air door.  Can the cable connection be reached through
> dash fresh air vents (I thought I someone said this last week).
> Any help would be appreciated,  Skip

///  or try
///  Archives at

<Prev in Thread] Current Thread [Next in Thread>