My understanding, and what is in my Moss catalogue which is from John Twist,
is to reverse the supply and ground connections inside the case as well as
the pick-up loop.
----- Original Message -----
From: "Dodd, Kelvin" <doddk@mossmotors.com>
To: "'Bill Meyer'" <wcameyer@msn.com>; "Matthew Hale"
<haleme@bellsouth.net>; "Mg List" <mgs@autox.team.net>
Sent: Wednesday, May 14, 2003 5:17 PM
Subject: RE: Negative ground tach, battery box, et al...
> Converting the 1965-67 MGB tach to negative ground is fairly
> straight-forward. It just requires changing the orientation of one
> component on the circuit board and cutting the white wire feed loop and
> reversing it.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|