The electrician's snake didn't work for me; the pipe was too narrow and had too
many bends. I'm hoping to not have to replace the pipe, as I'm certain to
break a few corroded retaining screws in the process.
--Steve (1980 MGB)
-----Original Message-----
From: Paul Root [mailto:proot@iaces.com]
Sent: Thu 5/22/2003 8:59 AM
Subject: Re: Clogged vapor pipe on 1980 MGB
... I have an electricians snake for pulling wire, that's fairly small and
the end is broken off. It's probably still too big...
Steve Shoyer wrote:
> I'm still trying to clear the vapor pipe on my MGB....
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|