They will not be even all the way across (if this is your concern) because the
cam will have some in a higher position. They don't seat on the cam anyway
they
seat in the lifters which ride on the cam. I don't know of anywhere else they
could go, just drop them in and put the rocker assembly back on.
AGreenberg@aol.com wrote:
> Fellas
> I'm in the middle of changing the head gasket on my '76 ( with a '78 engine
>), trying to squeeze out one more ride before the snow flies.
> Two push rods aren't seating down to the cam. I've wiggled and twisted but I
>can't get it down to the lobe. I kept them in order like the shop manual says
>but they just do go down.
> Any ideas?
>
> Alex
>
> Alex Greenberg
>
>
> 1976 MGB - Fair weather daily driver ( Junior )
> 1993 Subaru Legacy LSi - ridiculously reliable car
> 1974 Ducati 750 GT - wonderfully, beautiful motorcycle
>
>
>
>
> Alex Greenberg
> Clarinetist with Nefesh
> www.NefeshBand.com
|