mgs
[Top] [All Lists]

RE: Heater Installation

To: "'David Macedonia'" <david.macedonia@verizon.net>,
Subject: RE: Heater Installation
From: "Lew Palmer" <lpalmer@roundaboutmanor.com>
Date: Sun, 4 Apr 2004 17:48:30 -0500
Try four hands, five minutes, a few choice words, and a light coating of K-Y
Jelly. No kidding, it makes short work of the job.

Cheers,
Lew Palmer

-----Original Message-----
From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net] On Behalf
Of David Macedonia
Sent: Sunday, April 04, 2004 9:45 AM
To: Paul Hunt
Cc: mgs@autox.team.net; Barrie Robinson
Subject: Re: Heater Installation

Paul,

Actually, I've referenced that article many times. The text and pictures
have been very helpful. Unfortunately, when it comes to stuffing the heater
back in, here's what Barney has to say...

"The problem here is that thick rubber pad on the back of the box at the
bottom. This pad was so stiff as to dearly resist compression to the point
of making it very difficult to press the box back far enough to drop into
the well. But four hands, five minutes and a few choice words later the deed
was done."

For me it's been two hands, two hours and MANY choice words and the deed
still isn't done!

Thanks,

Dave

----- Original Message ----- 
From: "Paul Hunt" <paul.hunt1@blueyonder.co.uk>
To: "David Macedonia" <david.macedonia@verizon.net>; <mgs@autox.team.net>





<Prev in Thread] Current Thread [Next in Thread>