Went out again as inspiration struck. Disconnected the switch at the molded
connector and connected the cable and the lights were still on. The switch
is probably okay. Now I get to do surgery on the harness to see where and
what got fused .
----- Original Message -----
From: "Steve Gorr" <sgorr2@comcast.net>
To: <mgs@autox.team.net>
Sent: Saturday, July 17, 2004 8:12 PM
Subject: The Prince of Darkness pays a visit, kinda long
> What is the procedure for checking the switch out? Moss has
> them at a hefty $159 and I don't want to waste it if the real problem is
> farther down in the harness.
> Sorry for the wordiness.
>
> Steve Gorr
> '78 B Carmine
|