After reading so many problems others had with bleeding the clutch I didn't
even try, but filled the empty system from the *slave* nipple using a
Gunsons EeziBleed on very low pressure. Others have done the same using a
manual pressure pump or can. Consensus seems to be that this method
delivers full clutch travel (1/2" to 5/8" at the slave piston) without any
bleeding. You would have to pump out the master through the slave nipple
before refilling.
PaulH.
----- Original Message -----
From: "Martin Libhart" <libhart@cox.net>
To: <mgs@autox.team.net>
Sent: Sunday, August 01, 2004 12:47 AM
Subject: Re: bleeding clutch
> ... I
> have fluid at the slave bleed nipple, but very little pedal pressure.
|