Gents, I was working on my suspension spreadsheet for our school's Formula
car and I uncovered an error in my calculations. I plugged my car back into
it and it looks like a rear roll bar could do me a lot of good depending on
its geometry. The last time I brought this up the Moss kit was not
available, but it is again. Can anyone tell me the dimensions of their bar,
or of others. The two numbers I'm specifically after are the width between
the link eyes, and the length of the lever arm (center of bar to center of
link eye). I'd appreciate diameter and manufacturer also just to avoid
getting myself any further confused.
Thanks very much,
James Nazarian
71 MGBGT V8
71 MGB Tourer
87 BMW 325es
|