Steve,
Probably because:
1. release bearing worn down too far
2. clutch plate worn down too far
3. pivot pin and/or bushing for release lever badly worn
4. someone has cut length of slave pushrod
5. clevis pin and/or pushrod hole badly worn
6. some or all of the above
Rich Chrysler
----- Original Message -----
From: <Daybell7@aol.com>
To: <mgs@autox.team.net>
Sent: Sunday, October 23, 2005 7:07 PM
Subject: Clutch Cylinder Problem
> Listers,
>
> Why does the piston in the rebuilt slave cylinder travel too far dumping
> all
> the hydraulic fluid in my 72 MGB?
>
> Thanks in advance.
> Steve Hughes
> Gainesville, FL
|