mgs
[Top] [All Lists]

RE: Turn signals

To: "Hans Duinhoven" <h.duinhoven@planet.nl>,
Subject: RE: Turn signals
From: "Scott Regel" <Scott.Regel@dpra.com>
Date: Thu, 10 Nov 2005 13:05:18 -0600
Thanks for the input Hans.  That is originally what I thought too
because the only thing I did since the last time they worked was to
clean the area of the hazard switch.  I will give that a look tonight
and maybe a better giggle.

-----Original Message-----
From: Hans Duinhoven [mailto:h.duinhoven@planet.nl] 
Sent: Thursday, November 10, 2005 2:01 PM
To: Gosling, Richard B; Scott Regel; mgs@autox.team.net
Subject: Re: Turn signals

I'm not sure about a '76 B, but in my '71 BGT this mishap appeared,
because 
the hazard flash units had some contact issues. The indicator circuit is

part of this unit as well.
Remedy for me is to flick the hazard switch several times per year...

Hope this might be the simple solution for you.

Cheers,

Hans

----- Original Message ----- 
From: "Gosling, Richard B" <Richard.Gosling@atkinsglobal.com>
To: "'Scott Regel'" <Scott.Regel@dpra.com>; <mgs@autox.team.net>
Sent: Thursday, November 10, 2005 4:49 PM
Subject: RE: Turn signals


> Well then, it looks like you've got session with a voltmeter and a
wiring
> diagram in front of you.  There are 4 routes I can think of for this:
>
> 1. Start at the fusebox and trace the route towards the bulb until you

> find
> no electricity
> 2. Start at the bulb and trace the route towards the fusebox until you

> find
> electricity
> 3. Guess at the most likely failed component and check that
> 4. Check each component in order of how easy they are to check.
>
> It's less methodical, but I'd probably employ a mixture of methods 3
and 
> 4,
> as the route likely to lead me to a solution quickest.  Given that
it's 
> not
> the bulbs ('cos the hazards work) and it's not the fuse ('cos I assume

> you'd
> have noticed other items on the same fuse not working by now) I'd
check 
> the
> flasher first (by bypassing it as I suggested earlier), then the
wiring
> connector leading to the switch, then the switch itself.  If I hadn't 
> found
> the problem yet, the results of my checks so far would at least
indicate
> whether I needed to head upstream or downstream.
>
> Good luck!
>
> Richard & Nancy
>
>
> This email and any attached files are confidential and copyright 
> protected. If you are not the addressee, any dissemination of this 
> communication is strictly prohibited. Unless otherwise expressly
agreed in 
> writing, nothing stated in this communication shall be legally
binding. 




<Prev in Thread] Current Thread [Next in Thread>