A good point, motors and dynamos are the same thing, so if it motors it will
probably 'dynamo'. Although like the air compressor test it would still
remain to be seen if it gives the correct output voltage at 1000 rpm and
correct current at maximum load.
PaulH.
----- Original Message -----
> Put a well-charged 12 V battery on your workbench, as well as two pieces
> of electrical wire.
>
> Use one wire to connect the dynamo body to the (-) battery terminal.
>
> Connect D and F together with another wire and connect it to the (+)
> terminal of the battery.
>
> If the dynamo now speeds off the workbench it WAS OK :-)
|