Re: [Mgs] Poly Bushings in MGB upper trunnion

["Paul Hunt" <paul.hunt1@blueyonder.co.uk>]

Press the steel sleeves in the poly bushes before pressing the poly bushes 
into the trunnion, seems to be the way to go.

PaulH.

----- Original Message ----- 
> ... The steel sleeve, which I cut
> from the rubber, appears too large in diameter to fit inside the poly
> bushings, although the generic instructions specifically say to reuse 
> them.
> This sleeve is also a much closer fit to the shouldered bolt than the poly
> bush.
_______________________________________________

Edit your replies

Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs