mgs
[Top] [All Lists]

Re: [Mgs] Harness routing 67B

To: "Richard Ewald" <richard.ewald@gmail.com>
Subject: Re: [Mgs] Harness routing 67B
From: "Paul Hunt" <paul.hunt1@blueyonder.co.uk>
Date: Mon, 8 Nov 2010 09:02:42 -0000
Clausager?  There are quite good pictures of a 69 and particularly a 64 in 
there.  But basically as long as the components are in the right places the 
main run goes horizontally from back to front near the top of the inner wing 
with the tails dropping down vertically.  The rear harness and tail for it, 
and possibly the main harness to the starter goes through a couple of clips 
in that right rear corner.  The gearbox tail goes across the shelf to join 
to the gearbox harness, then down to a clip on the top right of the 
bell-housing.  On the 64 the main harness goes behind the mounting panel for 
the control box, with the rear and gearbox tails dropping down aft of that 
panel, and the other tails forward of it.  The 69 has the main harness 
routed under that mounting panel (still there even though it now has an 
alternator)/

PaulH/

----- Original Message ----- 
>I finally managed to figure out most of it, but in the rear corner of the
> engine bay is probably not correct. Any pics or diagrams of the RR corner 
> of
> the engine room would be a big help.
_______________________________________________

Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>