I think a major consideration would be keeping the front and rear u-joint
angles equal. It would be easier to adjust the engine angle to suit that
requirement rather than to shim the rear axle later.
-Tom Allen
At 04:16 PM 2/4/99 -0500, Kenneth Marty wrote:
>Hello all, IM ready to install my Eng.. & Trans 350- 350 in my 55 truck. I
>have read that the intake manifold needs to be level, but a friend said it
>should be tilted 3 degrees back . any help would be appreciated, Thanks.
>
>Ken 55
>
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
Tom Allen
Seattle, WA
|