You'll be fine
The truck is about 54, 55" from backing plate to baking plate.
Good Luck.
On Tue, 1 Jun 1999, Tayrien, Richard - MIH wrote:
>
>
> I am getting ready to haul my 52 1/2 ton GMC from Oklahoma to Arizona next
> week. The trailer I am renting has load limits of not greater than 4,055
> lbs., wheelbase no greater than 125", maximum width of 79" and a minimum
> width between the tires of 42". From what I can see I am Ok on the weight.
>
> I found a referenced curb weight of 3095 lbs
> wheelbase of 115"
>
> but I can't find a maximum or
> minimum width referenced.
>
> Could someone check a 1/2 ton AD for me to see if I will be able to get it
> on the trailer without any problems. It hasn't been running for about 8
> years so I will try to winch it on the trailer. It is sitting in Mom's
> backyard with the tires buried about 8 to 12 inches so I will no doubt need
> a come-a-long and a jack. I just pray the ground is dry.
>
> Any other suggestions from those of you that have transported these trucks.
>
> Thanks
> Dick Tayrien
>
> rtayrie@chw.edu
> richardtayrien@home.com
>
>
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
Thanks,
-JLS
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|