oletrucks
[Top] [All Lists]

RE: [oletrucks] Clutch head screws

To: "'Paul W. Franchina'" <pfoxtrot@gate.net>
Subject: RE: [oletrucks] Clutch head screws
From: Bill Simmeth <bill@merchantsoft.com>
Date: Wed, 11 Aug 1999 17:59:56 -0400
You might try Interstate Screw.  Never used them, but they have quite a
product line listing and indicate that they stock clutch drive screws.
Good Luck!  Here's their web address:

http://www.interstate-screw.com

Bill Simmeth
57 3200

> -----Original Message-----
> From: Paul W. Franchina [SMTP:pfoxtrot@gate.net]
> Sent: Wednesday, August 11, 1999 1:06 PM
> To:   oletrucks
> Subject:      [oletrucks] Clutch head screws
> 
> Does anyone out there know of a source for the clutch head sheet metal
> screws that are used extensively in the Task Force trucks? I've talked
> to
> Chevy Duty who sells lots of clutch head stuff but just about all of
> them
> are machine screws. Most of what I'm after tend to be #10 or #12 pan
> head
> types about 1" or less long. Most of what I have are pretty rusted.
> I've
> blasted some and used POR15 to paint the heads, but it's a pain
> because you
> have to go in and touch up the clutch head recess after installation
> because you invariably break/chip the paint putting them in.
> 
> 
> Paul W. Franchina
> pfoxtrot@gate.net
> & Boris: 1958 Chevrolet Apache 3100 Stepside
> oletrucks is devoted to Chevy and GM trucks built between 1941 and
> 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>