Rob asked how to remove chrome plating. I have had this done by a chrome
shop before powdercoating in the past with good results. Further in the past
I has tried roughing up the plated surface with sandpaper and then painting
the surface, but the results were not totally satisfactory as some of the
paint flaked off.
Paul O'Neil, Hudson29@aol.com
1951 Chevrolet 3600 Pickup Project, See it at:
The Poor Man's Advanced Design Tech Tips Page
http://home.earthlink.net/~conntest47/
Fullerton, California USA
AEROMARK - Need Rubber Stamps or Signs? See:
http://www.aeromark.net
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|