oletrucks
[Top] [All Lists]

Re: [oletrucks] Carburetor troubleshooting

To: lloydt@Colorado.EDU, oletrucks@autox.team.net
Subject: Re: [oletrucks] Carburetor troubleshooting
From: Advdesign1@aol.com
Date: Sat, 18 Mar 2000 07:17:49 EST
>  somehow the float levels have
>  been set way too high (there's fuel squirting out of my gaskets when I
>  pump the gas) 

Its common for the Rochester bowl to warp, letting fuel seep.  When carb top 
is off check surface on a sheet of glass for warpage.  Note when you pump 
throttle with engine off, fuel level in bowl will go down as it is squirted 
into throat. Other common problems are crud in needle making carb flood, or 
worn throttle shaft holes letting air in  for lean mix.
Bob Adler
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>