oletrucks
[Top] [All Lists]

Re: [oletrucks] More Shift lever location.

To: Mark Self <markself@discover.net>
Subject: Re: [oletrucks] More Shift lever location.
From: john dorsey <jrdorsey@strato.net>
Date: Sat, 10 Jun 2000 07:20:12 -0700
Mark,

These measurements are approximent as the hole area is raised on the 4 speed
plate.

Front of plate to front of hole 3-1/2"
Drivers side of plate to drivers side of hole 6-1/2"
Lenght of shifter 25"

Hope this helps.

John Dorsey
Wauchula, FL
'49 Chevy 3800 panel
'52 GMC 640 Firetruck





Mark Self wrote:

> I guess my question wasn't very clear.  I want my interior to appear as
> nearly stock as possible.  So the question is:
>
> Any of you guys with original manual floor shifts, what are the measurements
> for the hole in your transmission cover (distance from the front of the
> trans cover to center of shifter hole and distance from drivers side of
> trans cover to center of hole)?  Also how long is the stock floor shift
> lever?
>
> Thanks in advance
> ====================
>             Mark Self
>          Redlands, CA
>    '55 1st 5-window 3100
>    "Sentimental Journey"
> ====================
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959


<Prev in Thread] Current Thread [Next in Thread>