i had in a 56, exh, hitting steering box
Greg in Fla
-----Original Message-----
From: Mikerross@aol.com <Mikerross@aol.com>
To: oletrucks@autox.team.net <oletrucks@autox.team.net>
Date: Monday, July 03, 2000 11:16 PM
Subject: [oletrucks] Tranny Problem?
>Guys I have problem and need your thoughts. I installed a Chevy V-8 (305)
>with a turbo 350 tranny in my 56 Chevy truck. After almost three years of
>work I finally drove it for the first time yesterday. Everything worked
>great except one problem.
>
>When the tranny changes into third gear I start getting a fairly load
>knocking noise. It kinda sounds like a ball-pin hammer knocking on the
>tranny bell housing just below the accelerator pedal. It only does this in
>third gear.
>
>I checked the fly wheel for cracks etc. I check to ensure the flywheel was
>snug to the convertor. I don't know what else to do.
>
>I would appreciate any thoughts/ideas.
>
>Thanks.
>
>Mike
>'56 Chevy
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|