oletrucks
[Top] [All Lists]

RE: [oletrucks] transmission mounts TH350

To: <Passnb4U@aol.com>, <oletrucks@autox.team.net>
Subject: RE: [oletrucks] transmission mounts TH350
From: "Tom" <tomntam@earthlink.net>
Date: Sat, 28 Apr 2001 10:47:32 -0400
Hey Mike,
The cover does have a hump in it and still hits.  Would spacers or rubber
bushings be ok?
                Tom


1997 -2000 Racing Seasons     http://home.earthlink.net/~tomntam/index.html
Don't crush 'em, restore them!


-----Original Message-----
From: owner-oletrucks@autox.team.net
[mailto:owner-oletrucks@autox.team.net]On Behalf Of Passnb4U@aol.com
Sent: Saturday, April 28, 2001 10:41 AM
To: tomntam@earthlink.net; oletrucks@autox.team.net
Subject: Re: [oletrucks] transmission mounts TH350


In a message dated 4/28/01 7:03:04 AM Pacific Daylight Time,
tomntam@earthlink.net writes:

<< My TH350 transmission is hitting the floor pan in my 55 2nd TF. Is there
 suppose to be some rubber spacers on the ends of the transmission mount
that
 will lower the transmission?  As it is now the crossmember is bolted
 directly to the frame and the top of the tranny hits the removable floor
 pan.  This is the way is was before because I can see on the tranny where
it
 was rubbing.  Do i need rubber or would just some washer spacers work?
            thanks for the help,
            Tom Cooper >>

  Hi Tom,

  Is your tranny cover flat?  If so, look for one that came from a 4spd
track, it'll have a hump in it, and should be what yuo need:)

  Mike
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>